Gliderol Remote Coding

Gliderol Remote Coding Instructions

1. Access the Control Box:
   • Carefully remove the Control Box cover by lifting the tab located on the bottom of the unit.
2. Enter Learn Mode:
   • Press the red button once on the receiver. A red light will illuminate, indicating that the unit is in learn mode.
3. Program the Remote:
   • Press the large button on your handset once.
   • Wait until the red light on the receiver board turns off. This indicates that the new remote has been successfully coded.
4. Completion:
   • Your new remote should now be fully coded and ready for use.

Important Note:

• Remote coding should ideally be performed by professionals. Please take care when programming to ensure proper functionality and avoid any potential issues.